Equipments:
- Refractor PrimaLuce Airy ED90
- Mount Skywatcher HEQ5 Pro Synscan
- CCD Atik Titan
- XP 90° 31,8mm dielectric mirror diagonal
Location: Seoul, South Korea
Continue reading “3122 Florence close fly-by on August 31, 2017”
film making – photography – education – astronomy
Location: Seoul, South Korea
Continue reading “3122 Florence close fly-by on August 31, 2017”
Location: Seoul, South Korea
It’s there, at the center, not joking, really…
This is an analysis of gain and read noise of the CCD Atik Titan.
I used as samples, two bias frame and two photos of M27 taken with 60 seconds of exposure, even though it should be done with flat frames, as said in my documentation, probably because they have a better signal to noise ratio.
Anyway the result are in line with the official website specification so I am more than satisfied.
Here you can download the sample images I used.
| STD | Mean Pixel | Atik Titan Specification | |||
| Bias1 | 21,04 | 1235,00 | |||
| Bias2 | 20,95 | 1235,00 | FWC (e-) | 22500,00 | |
| Flat1 | 468,87 | 11883,83 | ADC (bit) | 16,00 | |
| Flat2 | 492,62 | 11798,47 | Readout Noise (e-) | 7,00 | |
| FWC (e-/ADU) | 2,91 | ||||
| Mean (Bias1 + Bias2) | 2470,00 | ||||
| Mean (Flat1 + Flat2) | 23682,30 | ||||
| STD (flat1 – flat2) | 419,72 | ||||
| STD (bias1 – bias2) | 29,51 | ||||
| Gain (ADU) | 0,12 | ||||
| Gain (e-/ADU) | 0,35 | Gain Factor (e-/ADU) | 0,34 | ||
| Read Noise | 2,53 | Readout Noise (ADU) | 2,40 |
Location: Seoul, South Korea
Galaxy in Aquila
That small dot at the center is NGC7013 in Cygnus
Galaxy in Cygnus
Globular Cluster in Pegasus
Location: Seoul, South Korea
Composition of 9 images for a total exposition of 15 minutes and focal length of 500mm
Composition of 30 frames for about 30 minutes of exposition and focal length of 500mm
Around 12 frames for a total of 20 minutes of exposition and focal length of 500mm
Testing payload and focus with my two cameras Atik Titan and QHY5L-II on AIRY ED90 with the following components:
With AIRY ED90 – Refractor 90mm Aperture – 500mm Focal length
Sadly looks like the diagonal is required in order to use CCD cameras and eyepieces with this telescope.
Atik Titan with Diagonal and no filters ( Focal length 495mm )
Atik Titan with Diagonal + Barlow 2x ( Focal length ~1000mm )
Atik Titan with Diagonal + Eyepiece ProZoom 24mm ( Focal length ~1200mm )
Without saying that this configuration is really heavy, way too long and can’t balance the mount in dec…
Atik Titan with Diagonal + Eyepiece 20mm ( Focal length ~1500mm )
Atik Titan with Diagonal + Eyepiece 16mm ( Focal length ~2000mm )
QHY5L-II with Diagonal and no filters ( Focal length 495mm )
QHY5L-II with Diagonal and Barlow 2x ( Focal length ~1000mm )
One of the first test with my new telescope.
This is a mosaic result of a 15 seconds video with an exposition of 0.06 seconds ( ~200 frames ).
Align, stack and elaboration has been made with Registax.
My new telescope!
Diameter: 60mm
Focal Length: 230mm
Ocular: PrimaLuceLab Lantanio ProZoom 8-24mm
just kidding…
Anyway if you get this compact refractor and you are that type that you like to open everything to understand how it works, be careful when you open the upper part, the lens is kept fixed by the two part connected and as soon as you remove the hood the lens might fall.