Disassemble HEQ5 Pro SynScan

She is my first love, we met twelve years ago, thanks to my family, I was able to afford it, I have beautiful memory with her, to keep for the rest of my life, but she still have lots to give and so today is time to clean her!

I decided to strip down my mount a second time, during a period of inactivity, and since I don’t have time to use it, better to get it in shape for when will be used.

I put here some of the photos I took during the strip and I will comments them if I feel to share some thoughts about it.

It should be said though, stripping this mount is not easy nor hard, but require knowledge and lot of patience. Before starting anything, you should know well, what steps you need to do and also you need to take your time, don’t try to go harsh or too fast or you might have a bad day.

I highly recommend to read the well made guide by Astrobaby about the stripping of the HEQ5. I read the guide many times before attempting the disassembling.

Continue reading

My HEQ5 Synscan Naked!

Yes I decided to clean my mount finally after… 10 years!

It wasn’t that hard, I followed the guide of astrobaby (http://www.astro-baby.com/heq5-rebuild/heq5-m1.htm) and I recorded my work so to watch again to remember the process and doing it in reverse to put all together.

At the end now I have a much more smooth Right Ascension axis and hopefully I will have a better guide experience!

Soon I will do some test and measure the periodic error.

No more fear after the first time!

IMG_20180107_233229 IMG_20180107_233200

Continue reading “My HEQ5 Synscan Naked!”